(601) 699-8246

|

hello@salvationrepair.com

CAMERA

  1. Home
  2. Posts

Canon Dslr Cf Card Slot Replacement Tutorial

Repair Tutorial: Fixing Your Canon DSLR Camera

First, you will need to remove the eyepiece cap by pulling it off with little pressure.

eyepiece cap removal

Next, remove the two screws hidden under the viewfinder eyepiece cap.

screws removal

Now, peel off the rubber grip on the back by grasping one of the corners and pulling it away from the camera body.

rubber grip removal

Once removed, a hidden screw is revealed.

hidden screw removal

Remove both screws from the rear of the camera.

screws removal

Remove the two indicated screws from the bottom of the camera.

screws removal

When lifting the panel, make sure not to lift it too high, since you’ll run the risk of tearing the cable, or damaging the connector on the board.

panel lifting

Flip the lock on the flex cable connector up with a spudger.

flex cable connector lock

The front panel should pop off, now that the cable has been disconnected.

front panel removal

When reassembling the device, make sure to insert the left side of the front panel first, since it has a small lip that needs to fit under the left part of the camera case.

front panel reassembly

0 Comment

Leave a Reply

Registration isn't required.