Canon EOS 6D Front and Top BodyPanel Replacement

Are you having troublewith yourCanon EOS 6D camera? Do you need to replace the frontand top body panels? Look no further! This tutorial will guide you through the process of replacing the front and top body panelsof your Canon EOS 6D camera.

Tools Needed

To replace the front and top body panelsof your Canon EOS 6D camera, you will need the following tools:

• Phillips #00 screwdriver
• Spudger
• Tweezers

Step 1: Remove the Viewfinder Cover

Start by removing the viewfinder cover from the top of the camera. Pinch the sides of the cover and slide it upward.

Step 2: Openthe Battery Door

Next, open the battery door on the bottom of the camera. Use your thumb to slide the small black tab on the inside of the battery door up and pull the door off the camera.

Step 3: Remove the Screws

Remove the following screws from the camera:

• Two silver 5mm Phillips #00 screws
• One black 6mm Phillips #00 screw

Step 4: Remove the Front Panel

Slowly fold the front panel to the right without pulling it away from the right edge of thecamera. Remove the 4mm Phillips #00 screw on the inside of the front panel to separate the panel fromthe speaker wire.

Step 5: Remove the Top Panel

Remove the 4mm Phillips #00 screw from the inside of the top panel, below the strap hook. Remove the 4mm Phillips #00 screw from the inside of the top panel, below the shutter button.

Conclusion

Replacing the front and top body panelsof your Canon EOS 6D camera is a relatively simple process that can be done with the right tools and a little patience. If you are not comfortable with this process, it is recommended that you seek the help of a professional repair service, suchas Salvation Repair. We offer a limited lifetime guarantee ofall parts and labor, and our experienced technicians can help you get your camera up and running in no time. Schedule arepair today!