Hp Officejet Pro Printer Repair
HP Officejet Pro Repair
Prepare Your Printer (Optional)
Removing the printer from the second paper tray and pulling out the paper tray from the front and the duplexer from the rear of the printer will assist in servicing the printer. Removing the print head (see HP user guide) may reduce ink leakage while working on the printer.
Disconnect the Control Panel
Hold up the control panel and reach underneath it. Pull firmly downward to detach it from the display.
Remove Scanner and Display
Lift the display further up. Reach behind the brown plastic cover, and pull it forwards to release it. Rest the machine on it’s rear panel. Lift up the brown clamp, and pull out the cable. Using a T-10 Torx screwdriver, undo the two screws beneath the display(pictured)On the back of the printer, remove the two screws on the right hand side(left-hand when viewed from the front. Open the door on the front of the computer, and remove the one screw on the lower left-hand side. Using a spudger lever firmly outwards on the lower rear side of the panel. With your other hand, push the panel backwards. Disconnect the scanner flatfex, sheet feeder and LED cables (marked in red). Remove the earth strap (marked in yellow). Remove the remaining screws around the top of the printer.
0 Comment