Mac Laptop Macbook Won’T Turn On Repair Tutorial
MacBook Won’t Turn On? Don’t Panic Try These Fixes First
Is your MacBook refusing to turn on? Don’t worry, it’s not the end of the world. Before you consider visiting an Apple Store or a repair shop, try these simple fixes to get your MacBook up and running again.
First Steps
Before we dive into the more complex solutions, let’s try some basic troubleshooting steps.
1. Reset the System Management Controller (SMC). This can sometimes resolve issues with your MacBook’s power management.
2. Reset the PRAM or NVRAM. This can help resolve issues with your MacBook’s memory and settings.
3. Check your display. If your MacBook’s display is not turning on, try adjusting the brightness or connecting an external display.
Causes of a MacBook That Won’t Turn On
Now that we’ve tried the basic troubleshooting steps, let’s explore some common causes of a MacBook that won’t turn on.
Faulty Power Source
It’s possible that your MacBook’s power source is faulty. Try using a different charger or power outlet to rule out any issues with your power source.
If you’re using a USB-C charger, try using a different cable or a different USB-C port on your MacBook.
Battery Fault
Over time, your MacBook’s battery can become faulty. If your MacBook won’t turn on, try removing the battery and plugging in the power cord.
If your MacBook turns on without the battery, it’s likely that the battery is faulty and needs to be replaced.
Firmware Corruption
If your MacBook is from 2018 or newer, it’s possible that the firmware is corrupted. Try using Apple Configurator 2 to revive or restore your MacBook.
Alternatively, you can try reinstalling the operating system using Internet Recovery.
Additional Solutions
If none of the above solutions work, it’s possible that there’s a hardware issue with your MacBook. Here are some additional solutions you can try:
Bad Power-In Board
The power-in board is a common failure point on MacBooks. If you suspect that the power-in board is faulty, try replacing it.
Trackpad Malfunction
Although it seems unlikely, a trackpad malfunction can cause your MacBook to not turn on. Try removing the trackpad and cleaning it to see if that resolves the issue.
Faulty Wi-Fi
If your MacBook’s Wi-Fi is faulty, it can prevent it from turning on. Try removing the Wi-Fi card and replacing it with a new one.
Faulty Storage
A faulty storage drive can prevent your MacBook from turning on. Try replacing the storage drive with a new one.
Faulty Logic Board
If none of the above solutions work, it’s possible that the logic board is faulty. In this case, you may need to replace the logic board or seek professional repair.
Conclusion
If your MacBook won’t turn on, don’t panic Try the basic troubleshooting steps and solutions outlined above. If none of these solutions work, it’s possible that there’s a hardware issue with your MacBook. In this case, you may need to seek professional repair or replace the faulty component.
At Salvation Repair, we offer a limited lifetime guarantee on all parts and labor. If you’re experiencing issues with your MacBook, schedule a repair with us today!
0 Comment