DIY Guide to Replace Apple iPhone 8 Earpiece
Duration: 30 min.
Steps: 16 Steps
If you’re struggling to hear during your iPhone 8 calls, it’s likely that the earpiece has seen better days. In this step-by-step photo guide, we’ll walk you through the process of replacing that faulty earpiece so you can enjoy crystal-clear sound once more. Wishing you all the best with your repair! And hey, we’d love to hear your thoughts on our guide. If you need a hand or have any questions, feel free to schedule a repair!
Step 1
– First things first, let’s keep your iPhone safe from any sneaky short circuits! To do this, simply press and hold the standby button for about three seconds until you see that ‘Turn off’ slider pop up on your screen.
– Now, give that slider a gentle swipe from left to right and hang tight until your iPhone is completely powered down. You’ve got this!
Step 2
– Loosen the two Pentalobe screws flanking the Lightning Connector and stash them safely in your screw storage. You’ve got this!
2 × 3.4mm Pentalobe
Hey there! To keep your screws and parts safe while you work your magic, we suggest using a screw storage solution. An old sewing box can do the trick! Here at Salvation Repair, we like to use a high-quality magnetic mat that helps us keep everything organized just like it was in the phone. That way, you’ll know exactly where each screw belongs, making reassembly a breeze!
Tools Used
Step 3
When it comes to heating up your device, the golden rule is to warm it just enough so you can touch it comfortably without feeling like you’re in a hot lava pit. Keep it cozy, not toasty!
– First up, let’s give your iPhone 8 a cozy spot to chill! Place it on a soft, clean surface to keep it scratch-free while we lift that display.
– Next, grab your trusty hot air tool—whether it’s a heat gun or a good old hairdryer—and gently warm up the outside of the display. Make sure to cover it evenly for the best results!
Tools Used
- heat gun to heat parts that are glued on so they’re easier to remove.
In most cases, you can also use a hairdryer.” rel=”noopener”>Heat gun
Step 4
Opening up your iPhone 8 means waving goodbye to its dust and splash resistance warranty, as well as its waterproof warranty. So, let’s tread carefully, shall we?
– Stick a suction cup right above the Home button on the display and give it a gentle tug upwards. This will create a snug little gap between the aluminum and display frames.
– Now, grab a flat plastic tool and slide it into that newly formed gap. Use it to gently nudge the aluminum frame upwards, making the gap a bit wider. Flat plastic picks work wonders for this!
Tools Used
Step 5
While you’re at it, keep that display angle under 180°! Going beyond that can put those delicate flex cables at risk of tearing. Let’s keep everything intact, shall we?
– With a gentle nudge, push the display upwards using your plectrum to free those sneaky lugs from the aluminum frame.
– Now, swing it open towards the standby button. Lean the display against something sturdy to keep those delicate cables from overstretching. You’re doing great!
Tools Used
Step 6
2 × 2.6 mm Phillips
2 × 1.0 mm Phillips
Before diving into the fun of repairing, let’s disconnect that battery connector! It’s like giving your device a little nap, preventing any unexpected short circuits or accidental wake-ups during our repair adventure.
– Grab your Phillips screwdriver and let’s tackle those four Phillips screws! Once they’re out, use your trusty tweezers to gently lift off the cover. Easy peasy!
– Next up, it’s time to disconnect the battery connector. Carefully use a plastic spudger to pry it off. You’ve got this—just take it slow and steady!
Step 7
– Grab that spudger and give those display connectors a little love by disconnecting them (both the display and home button). You’re doing awesome!
Tools Used
Step 8
3 × 1.0 mm Phillips
– First, let’s get those three Phillips screws out from the cover plate right above the connector. You can do it!
– Next, grab your trusty tweezers and gently lift off the cover plate from your iPhone 8. Easy peasy!
– Now, it’s time to carefully separate the FaceTime connector from the board using a spudger. You’ve got this, just be gentle!
– And just like that, you can now completely remove the display. High five for a job well done!
Step 9
1 × 1,5 mm Phillips-Schraube
2 × 2,5 mm Phillips-Schraube
1 × 2,2 mm Phillips-Schraube
1 × 1,7 mm Phillips-Schraube
Hey there! Just a friendly reminder that those screws come in different lengths. Mixing them up might lead to some unwanted display drama during reassembly. So, keep them sorted and you’ll be golden!
– The earpiece is nestled on the backside of the display unit. Start by unscrewing the three Phillips screws from the earpiece cover. Don’t forget to keep all those little parts organized on your magnetic pad!
– Next up, let’s tackle the two Phillips screws that are keeping the earpiece snug in its spot. You’ve got this!
– Ah, the earpiece is hiding under the front camera’s flexible flat cable. Just gently fold that cable to the side, and voilà! You can now easily lift out the earpiece.
Step 10
– Give that FaceTime camera cable a little lift to snug the earpiece back into its cozy home. You’ve got this!
1 × 2,2 mm Phillips-Schraube
1 × 1,7 mm Phillips-Schraube
1 × 1,5 mm Phillips-Schraube
2 × 2,5 mm Phillips-Schraube5
Hey there! Just a little tip: don’t go overboard tightening those screws, or they might peek through the paint on the front of your display. Keep it snug but not too tight!
Let’s make sure the FaceTime camera is sitting pretty in the center of the display front! If it needs a little nudge, go ahead and adjust it just right before you secure the bracket plate back in place.
Step 11
After you’ve popped on that shiny new adhesive frame, your iPhone 8 is ready to face the world with some dust and splash protection. Just a heads-up though—it’s not quite the water superhero it used to be!
The corners are unique and play a key role in helping you figure out the orientation. So, keep an eye on them as you go along!
– First, let’s kick off by giving that metal frame and display a little TLC! Make sure to wipe away any leftover adhesive residue so your shiny new adhesive frame can fit just right.
– Next, take a moment to align the adhesive frame with the back cover of your iPhone. This will help you position it perfectly. You’ve got this!
Tools Used
Step 12
3 × 1,0 mm Phillips-Schraube
– First, let’s get that display standing tall on the frame while you connect the FaceTime connector to the logic board. You’re doing great!
– Next, gently lay the display on the side of the back cover, just like a pro.
– Finally, cover that FaceTime connector with the plate and secure it with the three Phillips screws. You’re almost there!
Step 13
– Reconnect those two display connectors—both the display and the home button—back to the logic board. You’re doing fantastic!
Step 15
– Gently lay the display next to the back cover and give it a friendly fold over.
– Now, press down on the display with a nice firm touch across the entire surface. You’ve got this!
Wrong position
Right position
Hey there! Just a quick heads-up: make sure that silver chip on the cable is sitting just like it was before (check out the photo!). If it’s not in the right spot, you might end up with some funky discolorations on your screen after everything’s put back together. If you spot any issues, take a moment to double-check that cable position and align that chip just like in our pic!
Step 16
2 × 3.4 mm Pentalobe
– Time to wrap things up! Grab those two pentalobe screws that you set aside earlier and pop them back into their cozy spots on either side of the Lightning connector. You’re almost done!
Tools Used
