Infinity v2 10.1 Camera Replacement
Duration: 45 minutes
Steps: 4 Steps
Time to swap out the Infinity v2 10.1 camera if it’s refusing to power up, sporting a cracked lens, suffering from water damage, or snapping weird, distorted shots. Don’t worry, replacing the camera is pretty straightforward and doesn’t require any repair skills. You just need to gently unplug the camera from the motherboard — no tools necessary for that part, just your fingers. All you’ll need is something to open up the device and a fresh camera to pop in place of the old one.
Step 1
You'll hear a gentle click as each tab pops free, like a tiny victory sound!
- Gently pop open one corner of the device using your fingernail to start separating the screen from the back case.
- Grab an opening tool and carefully work it around the edge where you started to lift the case, easing it off all four sides of the tablet.
- Once the case is fully detached, slowly lift it up and set it face up on your workspace—watch out for those speaker wires connecting the two halves!
Step 2
- Carefully lift the speakers out of their slots and pop them free from the case.
Step 3
- Gently pry up the black connector securing the ribbon cable using your thumb or an opening tool.
Step 4
Keep those fingers away from the lenses of both cameras!
- Carefully lift the camera up and unplug it from the connector without rushing—treat it like a delicate little treasure!
