Hipstreet Equinox 2 Motherboard Replacement

Duration: 45 minutes
Steps: 6 Steps

Uh-oh! If your motherboard takes a nasty tumble or gets a bit too much love while you're swapping another part, it’s time for a replacement. Just a heads-up, all your data lives on the motherboard, so be prepared to say goodbye to it. But don’t stress! If you need a hand, you can always schedule a repair and we’ll take care of the rest!

Step 1

- Grab your PH00 screwdriver and twist out those two 3mm screws with a steady hand.

Step 2

- Grab your trusty blue plastic opening tool and gently work your magic to pop the back case off. You've got this!

Step 3

- Carefully unsolder these wires from the motherboard, and don’t forget to label them as you go along, just like the handy picture to the left! It’ll make reassembly a breeze.

Step 4

- Gently lift the clip shown in the picture to release the contact strips, then carefully pull the strip out of the clip. You've got this!

Step 5

- Using the trusty PH00 screwdriver, carefully unscrew those 3.5mm screws from the spots highlighted in the picture. You've got this!

Step 6

- Carefully lift the tablet's motherboard, making sure no wires are still connected or trapped as you ease it out.

Success!
Now it's time to put everything back together! Just retrace your steps in reverse, and you'll have your device up and running in no time. If you find yourself in a pickle, don't hesitate to schedule a repair. You've got this!

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.