Lenovo Ideatab A1107 Speaker Replacement
Duration: 45 minutes
Steps: 6 Steps
Get ready to breathe new life into your Lenovo Ideatab A1107! Our step-by-step guide will walk you through safely removing the speaker and getting your device sounding sweet again. We’ve got you covered with the essential tools and handy photos to make it a breeze. If you need help along the way, don’t worry, you can always schedule a repair with the experts at Salvation Repair.
Step 1
– Insert a plastic opener in-between the black back panel and the silver body of the tablet.
– Use the plastic opener to pry the back panel off by moving the plastic opener around the outside edge of the device.
Step 2
– Grab your Phillips #000 screwdriver and get ready—it’s time to tackle these seventeen 4mm screws. Take your time, stay steady, and soon you’ll have them all out like a pro!
Tools Used
Step 3
No worries if the volume and lock buttons decide to take a little vacation when you remove the interior casing!
– Gently lift and remove the interior casing to reveal the inner components. Take it slow, no rush—you’re almost there!
Step 4
– Gently grab the speaker wires—either with tweezers or your fingers—and disconnect them. No need for brute force; a little finesse goes a long way!
Tools Used
Step 5
– Grab your tweezers and gently lift the speaker off the casing. Take it slow and steady – it’ll come off with a little patience!
Tools Used
Step 6
– Carefully lift the speaker out of its cozy rubber casing. A little gentle tug will do the trick!
