Craftsman Model 315.10721 Table Guard Replacement
Duration: 45 minutes
Steps: 4 Steps
The table guard is a key player in ensuring your Craftsman Model 315.10721 makes those perfect cuts you’re aiming for. Just a heads up—when you’re ready to swap it out, be prepared for a bit of a time investment as taking apart the table guard can be a slow process.
Step 1
– Grab your trusty flathead screwdriver and gently twist out that 1/2″ flathead screw. This will let the table guard swing into action!
Step 2
– Time to get this repair started! Pivot the table guard from its upright position to a nice angle, getting it ready for the next steps.
– Now, grab your trusty Phillips #1 screwdriver and remove the 1″ Phillips screw and the nut on the opposite side. Easy does it!
Tools Used
Step 3
– Grab your trusty Phillips #1 screwdriver and get ready to unscrew! Take out those eight 1″ Philips screws from the main case.
– Now, with a gentle touch, lift off the main case to reveal the inner workings of your device. It’s like opening a treasure chest!
Tools Used
Step 4
– Gently lift the old table guard away from the main case like you’re peeling a sticker off a new gadget. Easy does it!
– Now, grab that shiny new table guard and place it in the same orientation as the one you just removed. It’s like a puzzle piece—if it fits, you did it right!
