Acer Iconia One 10 B3-A30 Repair Motherboard Replacement
Duration: 45 minutes
Steps: 9 Steps
Let’s get that motherboard out. To do this, you’ll need a couple of essential tools: a plastic opening tool and a Phillips #00 screwdriver. Don’t forget to remove all the tape surrounding the motherboard – it’s gotta go. If you’re feeling stuck, remember that you can always schedule a repair with Salvation Repair for some extra help.
Step 1
Ensure the device is completely powered off before starting the repair adventure!
– Let’s get started! First, carefully open the media port cover at the top of your tablet – it’s time to get inside!
– Next, grab your trusty Phillips #00 screwdriver and remove the tiny 1 mm screw. You got this!
Tools Used
Step 2
– Grab your trusty metal spudger and gently wiggle it to open up the back cover. You got this!
Tools Used
Step 3
– Peel away that little patch of grey tape! Let’s get the party started!
Step 4
– Disconnect the connection cord from the motherboard.
Step 5
Handle the battery with care – bending or puncturing it can cause damage, so let’s keep it safe and intact.
– First, let’s try to remove the battery by giving those blue tabs a gentle tug – it’s like a little wake-up call for your device!
– If that doesn’t work, no worries! Use the trusty black plastic spudger to carefully loosen the glue bonds underneath, and then pull up to set that battery free. Remember, patience and a little finesse go a long way in this step.
Tools Used
Step 6
– Peel away all the tape that’s hugging the motherboard like it’s a long-lost friend.
Step 7
– Let’s kick things off! Grab that trusty plastic opening tool and gently pry at the two big connections until they pop out like magic.
– Next up, it’s time to disconnect the two smaller black and red cords from the motherboard. You’ve got this!
Step 8
– Gently peel back that cute little square sticker to uncover a sneaky screw hiding underneath! Grab your trusty Phillips #00 screwdriver and twist that screw right out.
– Now, let’s keep the screwdriver party going! Use the same tool to remove the other three screws on the motherboard—all in a day’s work!
Tools Used
Step 9
– To get your device up and running again, just work your way back through these steps in reverse – easy peasy!
– You did it! If you need help with another repair or have any questions, you can always schedule a repair
