How to Replace Acer Iconia Tab A200 Battery – Step-by-Step Guide
Duration: 45 minutes
Steps: 5 Steps
The Acer Iconia Tab comes equipped with a Li-Po 3260 mAh battery that’s snugly secured in place with screws.
Step 1
– Grab that trusty plastic opening tool and gently pop off the gray plastic sides of the tablet—start on one side, then move to the other. Easy does it!
Step 2
Alright, time to get those two screws out from each side of the tablet before we can tackle the back casing. Let’s do this!
– Grab your trusty Phillips #00 screwdriver and pop out those 4.0 mm screws on the tablet’s sides. You’ve got this!
Tools Used
Step 3
Handle with care when prying along the edges where you took out the screw; the plastic casing is a bit delicate and could crack. Keep it cool and steady!
– Alright, first up—grab your trusty plastic opening tool and pop out those 4 screws. Then, gently work your way along the side of the device, prying it open with care. No need to rush; take your time and let the tool do the work!
– Once the case is loosened, carefully lift it off and set it aside. Now, flip the device over so it’s resting face-down on its screen. You’re doing great—keep it up!
Step 4
– Grab your trusty Phillips #00 screwdriver and let’s unscrew the 4.0 mm screws that are keeping the battery snug as a bug. You’ve got this!
Tools Used
Step 5
– Ready to wrap it up? Just reverse these steps to put your device back together and you’re good to go!
– Didn’t finish? No worries, you can always give it another shot.
– Need a hand? If it gets tricky, you can always schedule a repair.
Success!
