How to Replace the Speakers in Acer Iconia Tab A500 – DIY Guide
Duration: 45 minutes
Steps: 5 Steps
Time to give your Acer Iconia Tab 500 a little audio upgrade! Let’s swap out that speaker and get your tunes back in action. Ready? Let’s do this!
Step 3
Heads up: The 4 screws might not match each other, but don’t sweat it—this won’t mess up the speaker replacement.
– Alright, let’s get to it! Spot the 4 screws and that one cheeky cable keeping the two speakers in place.
– Grab your trusty Phillips #1 screwdriver and unscrew those 2mm black screws. Easy-peasy!
– Now, tackle the 2mm silver screws—say goodbye to them too!
Tools Used
Step 4
– Gently detach the connector cable by applying a little pressure on the edge of the black plastic insert. Take your time – no rush!
Step 5
– Put everything back together by reversing the steps you just followed—easy peasy, right?
– No worries if you hit a snag, you can always schedule a repair for some extra help!
– Take a moment to celebrate—your device is looking sharp and ready to roll!
Tools Used
Success!
