Xbox Series S Foot Replacement
Duration: 45 minutes
Steps: 4 Steps
If your Xbox Series S wobbles when you press on it, chances are one of the feet is missing, squished, or damaged. Let’s get it steady again by replacing the problematic foot.
Step 1
– Flip your Xbox onto your work surface so the side with the foot you’re swapping out is pointing up. Easy does it!
Step 2
Time to deal with that loose foot! If your Xbox already lost it, you can skip this step. Easy peasy!
– Gently slide the spudger’s pointy end beneath one edge of the foot.
– Carefully pry upward to liberate the foot from its Xbox home.
– And off comes the foot! Nice work.
Tools Used
Step 3
Give that footwell a good scrubbing! A clean space will help the new foot adhere to your Xbox like a champ.
– Pop a drop of isopropyl alcohol (make sure it’s over 70%) into the footwell—it’s cleaning time!
– Grab a spudger or even a trusty toothpick, and gently scrape away any sticky adhesive leftovers hiding in the footwell.
– Finish it off like a pro! Wipe down the footwell with a lint-free cloth or a coffee filter for that spotless shine.
Step 4
– If your Xbox is still missing some extra feet, no worries! Just go back and repeat the steps to get them replaced.
– Things didn’t quite go as planned? No stress! Try some basic troubleshooting or check out our repair resources for more help.
– All done, but not feeling confident? If you need help, you can always schedule a repair with Salvation Repair.
–
