How to Replace VTech Kidizoom Smartwatch DX2 Master Switch
Duration: 45 minutes
Steps: 4 Steps
If your watch is playing hard to get and refuses to turn on, it might be that the master switch is feeling a bit stuck or just not doing its job. Don’t worry! This guide will walk you through the process of swapping out one of the most important buttons on the Vtech Kidizoom Smart Watch DX. Let’s get that watch back in action!
Step 1
– Start by flipping the watch so its back is facing up, like it’s ready for a little pampering.
Step 2
– Next, use the Phillips #00 screwdriver to unscrew the four 6.0 mm screws located in each corner of the watch to remove the backplate.
Tools Used
Step 3
– Carefully lift the backplate to set it free.
Step 4
– Once you’ve popped off that backplate, gently lift the master switch up from the circuit board. You’ve got this!
Success!