DIY Guide to Opening Samsung Galaxy Watch3: Step-by-Step Repair

Duration: 45 minutes
Steps: 4 Steps

Get ready to pop off the back cover of your Samsung Galaxy Watch3! Follow these simple steps, and you’ll be on your way to making repairs like a pro. Remember, if you hit a snag, you can always schedule a repair for some extra help!

Step 1

– First things first, let’s give your watch a little break! Take it off the charger and power it down so we can get started on the fun part.

– Grab your trusty Tri-point Y00 driver and let’s get to work! Unscrew those four screws on the back of the watch like a pro.

Step 2

– Wedge an opening tool between the back cover and the metal housing—like you’re sneaking into a secret compartment.

– Give the tool a little twist to open up the gap. Slow and steady wins the race!

Step 3

– Place the watch face down.

– Gently lift the back cover from the button edge to access the sensor connector.

– Use a spudger’s flat end to pry up and disconnect the sensor flex cable from the motherboard.

Tools Used
  1. SpudgerOpening the Galaxy Watch3

Step 4

– To put your device back together, just follow these steps in reverse. Easy, right?

– Cancel: I did not complete this guide.

– If you need help, you can always schedule a repair

Success!

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.