VTech Kidizoom Smartwatch DX2 Speakers Replacement
Duration: 45 minutes
Steps: 8 Steps
If your watch’s speakers are acting up, looking cracked, or just feeling a bit under the weather, it’s time for a replacement. Don’t worry, we’ve got you covered with this handy guide!
Step 1
– Start by flipping the watch over so that the back is facing up.
Step 2
– Okay, time to grab your trusty Phillips #00 screwdriver and gently remove those four 6.0 mm screws hanging out at the corners of the watch. This will help you pop off that backplate. If you need help, you can always schedule a repair
Tools Used
Step 3
– Carefully lift the backplate upward to pop it off.
Step 4
– Once the backplate is off, gently pop the master switch up and away from the circuit board—easy does it!
Step 5
– Grab your trusty Phillips #00 screwdriver and unscrew that tiny 0.6 mm screw—it’s like unlocking the first level of a repair adventure!
Tools Used
Step 6
– Gently lift the speaker out of the case, making sure to keep it connected to the motherboard. You’ve got this!
Step 7
– Grab your trusty tweezers and gently lift the bar that’s holding the screen connection.
– Carefully take out the motherboard from the device.
Tools Used
Step 8
– To put your device back together, just follow these steps in reverse. If you hit a snag, you can always schedule a repair.
– Cancel: I couldn’t complete this guide.
–
Success!
