How to Replace the Camera on VTech Kidizoom Smartwatch
Duration: 45 minutes
Steps: 8 Steps
Got a busted, cracked, or just plain non-functional camera on your device? No worries—this guide has got you covered. Follow along to swap out that broken lens for a fresh one in no time!
Step 1
– Let’s start by carefully flipping the watch to its back side, so the back is facing up.
Step 2
– Now, grab your Phillips #00 screwdriver and take out the four 6.0 mm screws from each corner of the watch. Once they’re out, you can lift off the backplate. Easy peasy!
Tools Used
Step 3
– It’s time to get started! Carefully lift the backplate up to remove it.
Step 4
– Once you’ve got that backplate off, go ahead and give that master switch a gentle lift off the circuit board. Easy-peasy!
Step 5
– Let’s get started! Using a trusty Phillips #00 screwdriver, carefully remove that tiny 0.6 mm screw. Take your time, you got this!
Tools Used
Step 6
– Gently lift the speaker out of the case, making sure to keep it connected to the motherboard. Take your time—patience is key!
Step 7
– Okay, let’s get started! Use those trusty tweezers to carefully pry up the bar that’s holding the screen connection in place.
– Now it’s time to remove the motherboard from your device – don’t worry, it’s a straightforward process!
Tools Used
Step 8
– Get ready to flip that motherboard like a pro! Place it with the battery facing down, and take a closer look at the two clips that are keeping the cameras in place.
– Now it’s time to gently lift those clips and carefully slide the cameras out – you’re making great progress!
Success!
