Polar Smartwatch: Replace Polar M400 Watch Screen
Duration: 45 minutes
Steps: 8 Steps
Step 1
– Time to get started! Insert a standard paper clip into the tiny holes on both sides of the watch that connect the face to the wrist strap. Easy peasy!
Tools Used
Step 3
– Once you’ve freed the pins, the old wrist strap will pop right off.
– Just click the new wrist strap into place.
Step 4
– Grab your T5 screwdriver and twist out the four little screws holding the back of the watch face in place. Let’s get this show on the road!
Step 5
– Let’s get started! Carefully remove the backing from your watch to begin the repair process.
Step 6
– Gently coax the golden sensor away from the battery using your trusty tweezers. Think of it as giving it a little hug!
– With the plastic opening tools, delicately lift out the battery. You’re doing great—keep it up!
Tools Used
Step 7
– Pop that screen protector away from the screen like a pro using your trusty PH000 screwdriver. Easy peasy!
Step 8
– Now that you’ve tackled the assembly, just retrace your steps and put everything back together like a pro!
– If you hit a snag, remember, it’s totally cool to ask for help. You can always schedule a repair.
– You’ve got this! Just like that, you’re back in action.
Success!
