How to Open Samsung Galaxy Watch4: Step-by-Step Guide
Duration: 45 minutes
Steps: 5 Steps
Ready to dive into your Samsung Galaxy Watch4? Let’s get that back cover off! Follow this guide and you’ll be on your way in no time. If you find yourself in a pickle, don’t forget, you can always schedule a repair for some extra support!
Step 1
– First things first, let’s give your watch a little break! Take it off the charger and power it down so it’s ready for some TLC.
– Next up, it’s time to say goodbye to the watch band. Remove it with care!
Step 2
– Grab your Tri-point Y00 screwdriver and unscrew those four 4.0 mm-long screws like a pro.
Tools Used
Step 3
Hold your horses! Don’t go yanking off that back cover just yet. The sensor flex cable is still happily connected to the motherboard.
– Pop your opening tool into the seam where the back cover meets the metal housing—like a pro sliding a pick into a guitar string.
– Give that tool a confident twist to crack open a neat little gap. Easy peasy!
Step 4
– Flip the watch over so it’s chilling face-down.
– Gently swing the back cover open by flipping it to the opposite side of the gap you just made.
– Grab a spudger and use its flat end to lift and disconnect the sensor flex cable from the motherboard. Take your time—precision is key!
Tools Used
Step 5
– Time to put your device back together! Just retrace your steps and follow these instructions in reverse.
– Things not going as smoothly as you’d hoped? No worries! Give some basic troubleshooting a shot, or feel free to reach out to our awesome Answers community for a helping hand.
– Oops! If you didn’t finish this guide, just hit cancel and take a breather.
–
Success!
