Technicolor TC7200.U Teardown
Duration: 45 minutes
Steps: 4 Steps
Step 1
– Pop off those two rubber feet hiding the screws underneath.
– Grab your T10 screwdriver and unscrew those bad boys.
– Use your trusty spudger to gently pry off the top cover and lift it away.
Tools Used
Step 2
– Alright, at this stage, the board is snugly held in place by the case itself.
– Gently bend the front edge of the case outward, giving the board some freedom to rise up.
– Once the front side is clear, carefully slide the back side of the board out of the case.
Step 3
– Looks like there are still two parts hanging on to the case. Let’s get them off!
– Grab the spudger and gently work around the glued-on part to separate it from the case. Repeat the process on the other side, and you’re almost there!
Tools Used
Step 4
– First up, pop open the lid of the cable case. It’s a simple step, just give it a gentle lift.
– Take a moment to admire the board. It’s the heart of your device, and it’s about to get some attention.
– Time to unscrew the WiFi module. Gently remove those screws – no need to rush.
– Spot the Bothhand GS5014LF – it’s that little guy you’ll be working with next.
– And don’t forget the STMicroelectronics NAND512W3A2CN6 chip. It’s in the mix, so keep an eye on it.