How to Replace LG Smartwatch Battery: Step-by-Step Guide
Duration: 45 minutes
Steps: 6 Steps
Ready to swap out your battery case? Awesome! First things first, you’ll want to gear up with the right tools for the job. You’ll need to unscrew some screws and gently pry open a few components, so make sure you’ve got a PH #000 screwdriver, some plastic opening tools, and tweezers on hand. With these trusty tools at your side, you’ll be all set to dive into the battery case replacement for the LG Watch Urbane. If you need help, you can always schedule a repair.
Step 2
Check out the little hatch on the bottom of the watch—it’s your secret weapon to pop that watch open without a fuss!
– With a gentle touch, grab those trusty plastic opening tools and carefully work your magic to pop open the back cover of the watch. You’ve got this!
Step 3
Don’t let those three screws wander off! Find a cozy spot to keep them safe and sound! A magnetic mat could be your best buddy in this adventure. Check out the Ifixit Magnetic Mat for a little extra help!
– Grab your trusty PH000 screwdriver and let’s get those three screws out of the way to free the motherboard from the watch. You’ve got this!
– Now, take your plastic opening tools and gently detach the four connectors that are hanging out with the motherboard. Easy peasy!
Step 4
– Grab your trusty plastic opening tools and carefully lift up the motherboard. Nice and easy!
– SKIP THIS STEP IF YOU’RE JUST REMOVING THE MOTHERBOARD: Gently use the plastic opening tools to remove the battery. You’ve got this!
Step 5
– Grab your trusty PH000 screwdriver and unscrew those two highlighted screws to liberate the battery!
Step 6
– Now that you’re done, just reverse the steps to put everything back together!
– Oops, didn’t finish? Don’t worry, you got this!
– If you need help, you can always schedule a repair
Success!
