Lenovo Vibe Z2 Pro Battery Replacement Guide: DIY Step-by-Step
Duration: 45 minutes
Steps: 9 Steps
Step 1
– Grab your trusty screwdriver and remove those 4.9 mm torx head screws hanging out on the camera plate at the back of your phone. Easy peasy!
Step 2
– Time to get those screws out! Grab your trusty Torx head screwdriver and carefully remove the 3.65 mm screws located at the bottom of your phone. You’re doing great!
Step 3
– Gently pop out the SIM card tray by inserting a pin into the tiny hole on the side of your phone. Easy peasy!
Step 4
– Gently slide the Spudger into the tiny space between your phone and its backplate, like a pro, to help them part ways.
Tools Used
Step 5
– Gently wiggle and lift the backplate off your phone like you’re unveiling a surprise gift!
Step 6
– Gently coax the protective film off with your hands, as if you’re peeling a banana – just a little wiggle and it should come right off!
Step 7
Whenever you’re on a mission, reach for the trusty black nylon spudger! It’s your best buddy, especially when you’re navigating around those tricky batteries.
– Gently pry off any sticky strips keeping the battery snug as a bug, using your fingernail or a trusty spudger. You’ve got this!
Tools Used
Step 8
– Carefully disconnect the cheerful orange battery ribbon cable by gently prying it up with your trusty spudger. You’ve got this!
Tools Used
Step 9
– To put your device back together, just follow these steps in reverse order!
– Cancel: Didn’t finish this guide? No worries!
– If you need help, you can always schedule a repair
Tools Used
Success!
