Asus ZenFone 5 Lite Screen Replacement Guide: Step-by-Step
Duration: 45 minutes
Steps: 17 Steps
With this guide, you can easily swap out a cracked or scratched screen for a shiny new one. If you run into any bumps along the way, feel free to schedule a repair for some expert help!
Ready to bring your Asus ZenFone 5 Lite back to life? If your screen is looking a little worse for wear, this guide has got your back! Whether you’re dealing with cracks or just some unsightly cosmetic flaws, swapping out that screen is totally achievable. No special ninja skills required—just grab your trusty tools and follow these straightforward instructions. Remember to keep an eye on your fingers, apply just the right amount of pressure, and use the appropriate tools to avoid any accidental mishaps. And if you find yourself removing the lithium-ion battery, make sure to recycle it responsibly or dispose of it in a designated hazardous waste area. Let’s get started on this repair journey together!
Step 1
Handle with care! Keep the cover and the rest of the phone snug together to avoid snapping the delicate connection between the touch sensor on the cover and the phone’s motherboard. You’ve got this!
– Grab a slim plastic tool and gently work it under the back cover of your phone. Once you’ve got it pried open just a bit, glide the tool around the edges to break the adhesive’s grip. When you’ve freed all the edges, lift that back cover off like a pro!
Step 2
One of those sneaky seven screws is hiding under a white sticker with the letters “CS”. No need to peel it off, just use your screwdriver to pierce through the sticker and unscrew as usual.
– Alright, time to loosen those screws! You’ll find seven Phillips #0 screws chillin’ on the bottom of your phone. Let’s get ’em out!
Step 3
– Grab your trusty nylon spudger and gently wiggle it to pop off the lower cover. The opening tool is here to lend a hand, making it easier to lift that cover right off!
Step 4
Gently keep your finger on the charging port circuit board as you carefully disconnect it. This keeps it safe from any accidental breakage, and we definitely want to protect our little tech friends!
– Now, grab your prying tool and carefully lift that connection hiding under the black cover. You got this!
Step 5
– Find that sleek, gold-tipped black wire snugly attached to the charging port circuit board. You’ve got this!
– Slide your trusty plastic prying tool right under the shiny silver clasp and give it a gentle nudge to pop it off. Easy peasy!
Step 6
– Have a blast as you carefully slide in the trusty plastic tool on the left side of the charging port, while you gently lift it up and say goodbye with your hand!
Step 7
The vibration motor is that sleek little circular metal gadget chilling at the bottom right corner of your phone.
Step 8
– Gently pop off the back cover of your phone using a trusty suction cup and some opening picks. You’ve got this!
Step 9
– Grab your trusty Phillips #00 screwdriver and get ready for some fun! Unscrew those two little screws and gently lift off the small bracket. You’ve got this!
Step 10
– Grab your trusty blue plastic opening tool and gently pry off the top connector linking the process board to the back of your phone. It’s a breeze, just take your time!
Step 11
– Grab your trusty small screwdriver and carefully unscrew those five tiny black screws from the bottom section of your phone. You’ve got this!
Step 12
– Grab your trusty Phillips #00 screwdriver and let’s get to work! Carefully unscrew the two tiny silver screws from that sleek black section of your phone. You’ve got this!
Step 13
– Gently pop out the connector that’s cozying up to the front of the battery, and grab your trusty opening tool to carefully detach it from the circuit board. You’re doing great!
Tools Used
Step 14
– Gently pop out the tiny black clip perched on top of the battery that’s attached to the motherboard, and then carefully pry the battery away for a clean exit using your trusty tool.
Step 15
– Grab your trusty opening tool and carefully disconnect the final of the three connectors on the front screen. You’ve got this!
Tools Used
Step 17
– To put your device back together, just retrace your steps like a pro! It’s as easy as pie, really. If you find yourself scratching your head, remember, you’re not alone! If you need help, you can always schedule a repair.
– Oops! Looks like this guide didn’t quite do the trick for you. No worries, we’ve got your back!
–
Success!
