DIY Asus Padfone 2 vibration motor Replacement Guide: Step-by-Step
Duration: 45 minutes
Steps: 5 Steps
Step 2
– Grab your trusty plastic opening tool and gently slide it in to pop off the back cover of the phone. You’ve got this!
Step 3
The battery is stuck down with some sticky stuff. Just a heads up—be gentle with it and watch out for the connecting cord!
– Peel off that pesky warning sticker hiding the battery plug and cord.
– Spot the widest gap around the battery. Gently pry it out using the plastic tool—easy does it!
– Grab your tweezers and carefully disconnect the battery cord. You’ve got this!
Tools Used
Step 4
Grab a magnetic pad to keep those tiny screws from playing hide and seek!
– Grab your trusty T5 Torx screwdriver and get ready to tackle those 14 screws holding the internal back plate in place. Let’s get them out!
– Once you’ve freed all the screws, gently lift off the back plate and reveal the inner workings of your device.
Tools Used
Step 5
– Grab those tweezers like a pro and gently pull the motor from the housing, making sure to tug the plug straight down and away from the phone. Easy peasy!
– Next, with those trusty tweezers, unplug the device from the circuit board like you’re giving it a gentle high-five. You’ve got this!
Tools Used
Success!