Samsung Galaxy Rush Camera Replacement Guide: DIY Tutorial

– Alright, let’s make this happen! Head to the back of your device and give that back cover a gentle nudge with your finger. It’ll slide off with a little finesse. If you need help, you can always schedule a repair!

– Pop that battery out like a champ!

– Let’s get started by removing the six screws that hold the back panel in place – grab a small Phillips-head screwdriver and get to work! If you need help, you can always schedule a repair

– Grab your trusty pry tool and gently work it around the back panel to separate it from the phone. Start at the edge closest to the screen for an easier time. You’ve got this!

– Grab your trusty tweezers and gently lift those connectors off the motherboard like a pro!

– Keep an eye out for the first connector, it’s hanging out on the upper left side.

– Now, let’s find the second connector—it’s chilling towards the top of the phone, just above the camera, and it’s super easy to remove.

– Time to get a little delicate – use your trusty tweezers to carefully pluck out the 2 adhesive orange ribbons.

– Remember, these ribbons are still attached to the motherboard, so be gentle to avoid any damage.

– You’ll find them hanging out on the side of the phone. If you need help, you can always schedule a repair

– Alright, let’s get this show on the road! Grab your trusty Philips-head screwdriver and give that single screw on the bottom of the phone a little spin. You’ll find it hanging out to the right of the charging port. Easy peasy, right?

– Gently lift the motherboard upwards, letting it leave its cozy spot next to the screen. You’re on your way to a successful repair!

– Keep that motherboard steady, circuits facing your way, and give that back camera a gentle lift with two fingers. A little wiggle might do the trick. And if you need help, you can always schedule a repair.