Samsung Galaxy Prevail Touch Screen Replacement Guide – DIY Repair
Duration: 45 minutes
Steps: 7 Steps
With our rad step-by-step guide, you’ll be all set to tackle that unresponsive or cracked screen issue in no time! If you need help, you can always schedule a repair at schedule a repair.
Step 1
– With a gentle touch, pop off the back panel by pushing the open slit near the headphone jack outward. You’ve got this!
Step 3
– Get your trusty Phillips #00 screwdriver and go on a little adventure to remove those (6) 4mm screws! You’ve got this!
Tools Used
Step 4
Heads up! The metal trim around the headphone jack might get a little loose during this step. Just a heads-up to keep an eye on it!
– Now, let’s get that back panel off! Grab your trusty black spudger and carefully pry open the secondary rear panel, where the camera lens and speaker hang out. You got this!
Tools Used
Step 5
Alright, time to hook up the motherboard to the shield plate using that ribbon cable. Just slide it in, no need to force it! If you need a hand, you can always schedule a repair.
– With your trusty spudger in hand, give the motherboard a gentle nudge upward on the right side. You’ve got this!
Tools Used
Step 6
The shield plate won’t come off completely since it’s still connected to the front panel by a ribbon cable. Take your time, and be careful not to damage it. If you need help, you can always schedule a repair.
– Time to give that gray shield plate a little lift! Using your spudger, gently pry it up from the right side. It’s like giving it a little high five, but with a tool! You got this!
Tools Used
