Samsung Galaxy Luna LCD Replacement Guide

Duration: 45 minutes

Steps: 5 Steps

Ready to give your Samsung Luna a brand new look? This guide’s got you covered! We’ll walk you through replacing that cracked LCD screen with a fresh one. No need to worry, it’s a bit like giving your phone a makeover. If you need any help, you can always schedule a repair.

Step 1

display Replacement” src=”https://guide-images.cdn.ifixit.com/igi/BVVqHZWIthuNRaLR.medium” class=”d-block w-100″>

– Alright, let’s get this glass screen party started! Attach a small suction cup to the lower half of the glass screen. It’s like giving the screen a little hug.

Step 2

display Replacement” src=”https://guide-images.cdn.ifixit.com/igi/KWxpqPbRnoEX4qw4.medium” class=”d-block w-100″>

– Give a little push to the center of the screen while gently lifting the bottom edge by twisting your wrist. You’ve got this!

Step 3

display Replacement” src=”https://guide-images.cdn.ifixit.com/igi/eIQq3FfYnjOhfxVP.medium” class=”d-block w-100″>

Heads up! The LCD is super delicate, so be careful when you’re sliding that spudger around the gap. You got this! If you need help, you can always schedule a repair

– Alright, time to get that gap open! Slide a Spudger tool between the glass and the motherboard, nice and easy.

– Keep sliding that tool around until the screen’s totally free from the motherboard. You got this!

Tools Used

Spudger

Step 4

display Replacement” src=”https://guide-images.cdn.ifixit.com/igi/xD5LFejEqafQextK.medium” class=”d-block w-100″>

display Replacement” src=”https://guide-images.cdn.ifixit.com/igi/2E2PUXJSDRH6ma3u.medium” class=”d-block w-100″>

Before you separate the panel from the phone frame, double-check that it’s completely detached – we want to avoid any extra stress on those tiny components. If you need help, you can always schedule a repair

– Now it’s time to get that rear panel completely off – gently pull it up and away from the device until it’s fully separated.

Step 5

display Replacement” src=”https://guide-images.cdn.ifixit.com/igi/TsFFKoKkUoQ3pWXH.medium” class=”d-block w-100″>

display Replacement” src=”https://guide-images.cdn.ifixit.com/igi/2kjgBaDrRVaF4XXq.medium” class=”d-block w-100″>

display Replacement” src=”https://guide-images.cdn.ifixit.com/igi/FC2pBKYV5PfFGKdy.medium” class=”d-block w-100″>

Hey there, be a little careful when you’re prying that glass panel – the LCD is pretty delicate, you know? Just go easy and everything will be a-okay!

– Let’s get this screen separated! Carefully slide the spudger tool between the LCD and the glass screen.

– Now, keep going! Slide the spudger tool along the edge until the screen and display are completely parted. You’re doing great! If you need help, you can always schedule a repair

Tools Used

Spudger