DIY Guide: How to Replace the Back Cover on Samsung Galaxy A8
Duration: 45 minutes
Steps: 5 Steps
be careful not to compromise those waterproof seals
everything should function as expected
you might lose that waterproof protection
don’t forget to apply some fresh adhesive for a secure fit
Get ready to breathe new life into your Galaxy A8 by replacing the back cover. Keep in mind that opening your phone will compromise the waterproof seals. To keep your device waterproof, you’ll need to replace the adhesive gaskets. If you don’t, your phone will still work just fine, but it won’t be waterproof anymore. You’ll likely need some replacement adhesive to secure the back cover in place. If you need help or want a pro to handle it, you can always schedule a repair.
Step 1
– First things first, let’s power down your phone. Safety first, right?
– Grab your trusty iOpener or a hair dryer to help loosen up that stubborn adhesive on the back of the A8.
– Take a look at the photo; the adhesive is lined around the edge of the back cover, highlighted in red. Let’s get it all nice and soft!
Step 2
If you’re having a tough time getting that pick to budge, try giving the iOpener another warm-up or grab a hair dryer for a little extra heat.
– Grab your trusty suction cup and use it to carefully lift the back cover, then slip an opening pick into the gap you’ve created – you’re making great progress!
– Now, start in the middle and gently cut through the adhesive while keeping a firm grip on the suction cup, you’re doing fantastic! If you need help, you can always schedule a repair
Step 3
Don’t wrestle with that cover! If it’s not budging or starting to get a little funky, warm up the adhesive with an iOpener or a hair dryer to give it a little love.
In the photo across the way, three corners have popped loose, leaving just one corner holding on tight. Once you take care of that, the glass will be ready to come off like a champ!
– Let’s loosen up this back cover! Gently wiggle your pick around each corner, leaving one in place at each to keep it from closing up on you. Do this for all 4 corners, like a cool little dance party for your phone!
– Hey, be mindful of that fingerprint reader connector when you’re opening things up. It’s a delicate little thing. Follow the next step to disconnect it safely, and you’ll be golden.
Step 5
Alright, let’s wrap things up! Before putting your device back together, we need to remove any leftover sticky stuff from the phone. Grab your trusty spudger and give those adhesive areas a good clean. Wipe them down with some isopropyl alcohol and a lint-free cloth. You got this! If you need help, you can always schedule a repair
– Pop off the back cover like it’s the lid of a treasure chest!
