DIY Galaxy J3 Prime LCD Screen Replacement Guide
Duration: 45 minutes
Steps: 8 Steps
Alright tech-savvy friend, get ready for an adventure! This guide will show you how to expertly disassemble and reassemble your Galaxy J3 Prime. There’s even a video to walk you through for some extra help if needed. If you get stuck or need a hand, you can always schedule a repair.
Step 1
– Let’s get started by taking off the back cover and removing the battery. This is the first step in giving your device a brand new lease on life. If you need help, you can always schedule a repair
Step 2
– Warm up that screen to make the adhesive a bit more cooperative.
– An iOpener or a hair dryer will do the trick, just be careful not to turn your phone into a mini sauna!
Tools Used
Step 4
– Alright, now let’s take a peek inside. You’ll see a plastic bracket holding things together – go ahead and give it a gentle nudge to remove it. You’re doing great!
Step 5
– Time to give that screen a gentle lift! Carefully peel up the LCD screen adhesive to get the screen off. You got this! If you need help, you can always schedule a repair.
Step 6
– Unscrew the screws on the back of your phone frame that are keeping the housing snug as a bug. Time to give it a little freedom!
Step 7
– Now that you’ve removed all the screws, it’s time to carefully pry up the frame using a screwdriver or spudger – just be gentle to avoid any damage.
– Take your time and be careful not to break anything. If you need help, you can always schedule a repair
Tools Used
Step 8
– Alright, let’s get this party started! First things first, we need to disconnect that metal flex cable from the charging port. Just gently lift it up and unplug it. You got this!
– Next, we’re going to remove the Motherboard. Don’t worry, it’s not as scary as it sounds. Carefully lift it out of the housing and set it aside. You’re doing great! Keep going!
