How to Replace Asus ZenWatch Vibration Motor Step-by-Step Guide
Duration: 45 minutes
Steps: 11 Steps
Hey there! Just a friendly reminder to take your time and double-check everything as you go. If you hit a snag or need a hand, don’t hesitate to schedule a repair. You’ve got this!
Get ready for a fun adventure as we guide you through the process of taking out and putting in a vibration motor. It’s like a little dance for your device, and we’re here to help you every step of the way! If you need assistance, you can always schedule a repair.
Step 1
– On the strap, you’ll find a handy knob. Just slide this knob towards the other side of the strap, and voilà! The tension on the spring bar is released, making it super easy to pull the strap out.
Step 2
Keep your parts in check with the magnetic pad!
– Grab your trusty T5 Torx driver and unscrew those four screws holding the case in place. You’ve got this!
– Once the screws are out, just give the case a gentle nudge, and it should pop right off with minimal fuss. Easy peasy!
Step 3
Be gentle when peeling away the fabric! Applying too much pressure might mess with the connection, so take it easy with those metal tweezers.
– Grab those tweezers and carefully lift off the fabric that’s shielding the battery connection.
– Take the heavy-duty spudger and gently nudge the contact upwards toward the top of the case.
Tools Used
Step 5
There are two connection ports on the single ribbon. Remember to handle it gently—too much force and you might just rip that ribbon!
– With the metal tweezers, carefully lift off the fabric that’s covering the connection in the bottom right corner.