DIY MacBook Pro 15 RAM Replacement Guide – Step-by-Step Tutorial
Duration: 45 minutes
Steps: 3 Steps
Hey there! Just a little heads up: while you’re diving into this repair adventure, keep in mind that things might get a tad tricky. But don’t worry, you’ve got this! If you find yourself in a pickle, remember that you can always schedule a repair with the pros at Salvation Repair. Let’s get to it!
Boost your device’s speed in a snap by giving your RAM a little upgrade! It’s like a power-up for your tech. If you need help, you can always schedule a repair.
Step 1
– Let’s get down to business! Start by unscrewing those ten little screws that are holding the lower case snugly to the upper case. You got this!
Step 2
– With a little finesse, use both hands to gently lift the lower case near the vent and pop it off the two clips that are holding it snugly to the upper case.
– Carefully remove the lower case and place it aside, giving it a well-deserved break.
Step 3
These tabs keep the chip snug and secure, so when you release them, the chip will give a little “pop” and rise up!
– Gently press the tabs on either side of the RAM chip to release it, giving each tab a little nudge away from the chip.
– Once the RAM chip pops up, carefully pull it straight out of its socket like a pro.
– If you’ve got a second RAM chip in there, just repeat the same steps and you’re all set!
