Acer Aspire 4520-5464 Keyboard Replacement

Duration: 45 minutes
Steps: 7 Steps

Get ready to breathe new life into your Acer Aspire 4520-5464 laptop by replacing the keyboard. This essential component lets you type and command your laptop with ease. Follow this clear and easy-to-read step-by-step repair guide to get the job done. If you need help along the way, you can always schedule a repair.

Step 1

– Power off your device and unplug any cables or external devices. Let’s give it a little rest!

– Flip the device over carefully, it’s time to get to work on the other side.

Step 2

– Make sure the battery lock tab is in the unlocked position before proceeding.

– Slide the black tab away from the battery compartment to loosen things up.

– Gently lift the inside edge of the battery—it should pop out just a little, making it easier to remove.

Step 3

– Grab the edge of the battery with your fingers and gently lift it out to disconnect it from the device. If you need help, you can always schedule a repair.

Step 4

– First up, grab your screwdriver and unscrew the five tiny 1mm Phillips #1 screws hiding inside the battery compartment. Next, locate the top edge of the case and remove the three 2mm Phillips #1 screws along the perimeter. Keep track of all screws as you go—salvationrepair.com can help if you need a hand with the tricky bits. When you’re ready, proceed to the next step to continue your repair adventure!

Step 5

– Time to get started! Use your trusty prying tool to carefully remove the gray plastic section above the keyboard – it’s like a little door waiting to be opened.

– Now, gently lift off the keyboard. You’re making great progress!

Step 6

– Grab the keyboard from behind the function keys and carefully lift it up – you got this!

Step 7

– Flip up the small black locking tab where the keyboard connects to the laptop—think of it as unlocking a little treasure chest.

– Gently slide the keyboard cable toward the trackpad and lift out the keyboard. Mission accomplished!

Success!
Now it’s time to put everything back together. Just follow these steps in reverse order, and you’ll be back up and running with your new keyboard in no time!
If you run into any trouble, don’t hesitate to schedule a repair.

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.