Acer Aspire 5253 Speaker Replacement

Duration: 45 minutes
Steps: 25 Steps

Step 1

– Flip the laptop onto its back like a pro.

Step 2

– Let’s get started by unlocking your battery – simply flip the switch until you see an unlocked lock on a red background. Easy peasy!

Step 3

– Now, flip the other switch while the unlocked symbol is still visible. The battery should pop right up, no longer snug against the bottom of the laptop.

Step 4

– Now it’s time to remove the battery – simply lift it out of the laptop from the side closest to the switches.

Step 5

– You’ve nailed it! The battery is out, and you’re one step closer to getting your device up and running again. Great job!

Step 6

– Alright, let’s find those two screws that are keeping the back cover panel snug on your laptop. They’re your first step to getting inside and doing some magic!

Step 7

– Grab a Philips #00 screwdriver and confidently remove the two screws holding the back panel in place—you’re doing great!

Step 8

– After taking out both screws, grab a trusty plastic opening tool and gently pop the panel up. Start at the little notched spot, then work your way left and right from there. Easy does it!

Step 9

– Once you’ve loosened the panel with your trusty plastic opening tool, slide your finger into the gap and gently lift the panel away from the laptop. You’ve got this!

Step 10

– Flip your laptop over and open it up, just like the image shows.

Step 11

– Let’s get that keyboard out – first, find the sneaky tabs that are holding it in place!

Step 12

– Grab your trusty tweezers and gently press the keyboard tabs inward. As you do this, lift up the edge of the keyboard with care—it’s like unlocking a tiny treasure chest!

Step 13

– As soon as the keyboard starts to pop out, give it a little lift with your hand to keep the detached part floating above the laptop.

– Keep on pushing in those tabs and gently lifting the keyboard as we’ve discussed. You’ve got this!

Step 14

– Now that you’ve successfully separated the keyboard from the laptop’s body, gently lift it up and tilt it forward. Let it rest comfortably on the laptop, just like shown in the picture!

Step 15

– Grab those tweezers and gently tug the white tab down on both sides. This little move will set the blue and black connector free!

Step 16

– Gently wiggle and pull the blue and black connector out of its socket—like unplugging your favorite headphones, but with a touch more finesse.

Step 17

– Gently lift the keyboard away from the laptop, taking care not to damage anything underneath.

Step 18

– Alright, you’ve tackled the prerequisites like a champ! Now, flip your laptop over and let’s get to those screws. First up, grab your Phillips #00 screwdriver and remove all the screws marked in red. These little guys are 1/4″ in head diameter and 3/8″ in length.

– Next, it’s time to focus on the screws highlighted in orange. With your trusty Phillips #00 screwdriver, unscrew these as well. They’re 5/32″ in head diameter and 5/32″ in length. Remember to keep these screws separate from the others—you don’t want to mix them up!

Step 19

– Turn your laptop back over and get ready to tackle those screws! Grab your trusty screwdriver and unscrew those 7/32″ long screws with 1/4″ diameter heads, just like the ones shown in the picture. You got this!

Step 20

– The highlighted spots show where various components, like the power button and trackpad, hook into the motherboard. It’s time to break out the tweezers again and unplug these connections—just like you did with the keyboard. You’ve got this!

Step 21

– Here’s a close-up of all the connectors—you’re gonna be a pro at this! Grab your tweezers and gently grip the black part. Carefully nudge both sides back a bit, and once it’s loosened up, pull the connector out smoothly, just like you’d do with the keyboard. Easy peasy!

Step 22

– Gently start lifting one corner of the laptop’s top panel. As it begins to loosen, keep lifting it up while steadying the side that’s opening with your other hand.

Step 23

– Flip over the panel you just removed and spot the speaker hiding underneath.

Step 24

– Find those two screws holding the speaker in place and gently take them out to free the speaker from the panel.

Step 25

– Time to pop out the speaker from the panel. It’s ready to be removed now!

Success!
To put everything back together, just follow these steps in reverse – easy peasy!
You did it! If you need help with another repair or have any questions, you can always schedule a repair

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.