Acer Iconia Tab 8 A1-840 Camera Replacement Guide: Step-by-Step DIY

Duration: 45 minutes
Steps: 5 Steps

Time to get that camera replaced! First things first, you’ll need to remove the back cover. Don’t worry, it’s a breeze. Once that’s off, the camera is one of the simplest components to swap out. You got this!

Step 1

– First things first, power down that device!

– Unplug all those pesky cables.

– Lay your device face-up on a nice, flat surface.

Step 2

– Carefully slide that plastic opening tool into the gap between the display screen and the back panel like you’re opening a secret door!

Step 3

– Time to get your hands dirty! Carefully pry the display away from the back panel, taking your time to avoid any damage.

Step 4

– Grab your spudger and gently pop the black flap open like a pro.

Step 5

– With your ESD-safe precision tweezers, gently pull the connector to disconnect it, and then carefully remove the camera. You’ve got this!

Success!
Alright, it’s time to put your gadget back together! Just retrace your steps and follow these instructions in reverse. You’ve got this! And remember, if you hit a snag and need a hand, don’t hesitate to schedule a repair.

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.