Apple Watch Series 3 Adhesive Replacement
Duration: 45 minutes
Steps: 6 Steps
Get ready to tackle the adhesive replacement for your Apple Watch Series 3! This guide walks you through the steps for the standard GPS-only version, and worry not, the cellular/LTE version is pretty much the same. Just keep an eye out for any key differences noted along the way. And remember, if you need help, you can always schedule a repair!
Step 1
Ready to tackle that adhesive? First, gently fold down the display and give it a little wiggle away from the frame. This will create just the right amount of space to work with!
- Grab a Q-tip or a cleaning pad and dampen it with a splash of isopropyl alcohol (over 99% is ideal). Gently wipe away those pesky adhesive remnants lingering on the force touch gasket. You've got this!
Step 2
- Flip the Apple Watch over so the screen is flat and gently lift the case away.
- Wipe away any leftover gunk from the back of the display to get a clean slate.
Step 3
- Grab a trusty pair of tweezers and gently peel away the replacement adhesive, making sure to keep that blue protective film intact as you lift it off the backing paper. You've got this!
Tools Used
Step 4
- Grab that replacement adhesive and hold it diagonally over the display like a pro!
- Gently tilt the display forward to line up that adhesive just right with the frame. You've got this!
- Now, place the adhesive on top of the force touch gasket and take the pointed end of your spudger to nudge and press it into position. You're doing great!
Tools Used
Step 5
- Pop the battery back in place, just like in the guide you followed earlier. Easy peasy!
- Peel off the protective film from the adhesive—time to stick everything down securely.
Step 6
For a steady hold, try using screen vice clamps around the edges of your device to apply the new adhesive evenly. This helps ensure everything stays in place as it sets up. If you need a hand, you can always schedule a repair.
- Line up the screen with the frame, then press down gently but firmly to stick it to the adhesive.
- Want to give that adhesive some extra love? Warm up the display with an iOpener, then apply steady pressure for a few hours—stacking a couple of hefty books on top overnight does the trick.
