ASUS PadFone X Battery Replacement Guide: Step-by-Step DIY

Duration: 45 minutes
Steps: 5 Steps

Time to give your PadFone X a fresh boost! Let’s swap out that battery and get it running like new again. Ready? Let’s dive in!

Step 1

– Grab your trusty blue plastic opening tool, and slide the tip into the groove between the back cover and your phone. Gently pry it up.

– Keep working your way around the phone until the entire back cover pops loose.

Step 2

– Grab your Torx T5 bit and gently remove those 13 – 3.6 mm screws. You’ve got this!

Step 3

– Grab your trusty blue plastic opening tool and gently slide the tip into the groove between the mid-frame and the phone. Give it a little upward nudge!

– Keep working your way around the phone like a pro, until the whole back cover is feeling loose – then simply lift off the mid-frame to set it free!

Step 4

– Grab that trusty blue plastic opening tool and carefully pop the battery cable off the motherboard. Easy does it!

Step 5

– Grab that trusty blue plastic opening tool and carefully pop the battery pack out of your phone. Just make sure to pry along the edge away from the motherboard to avoid any accidental damage. If you need help, you can always schedule a repair

Success!
You did it! Now just put your device back together, starting from the end of the guide and working your way backwards. If you need help, you can always schedule a repair.

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.