Asus Tablet MeMo Pad 7 ME7000C Speaker Replacement
Duration: 45 minutes
Steps: 8 Steps
Ready to bring your Asus Tablet MeMo Pad 7 ME7000C back to life? This guide’s got your back as you tackle the task of swapping out that broken speaker. Let’s dive in and get your tunes cranking again!
Step 1
– Turn the tablet over so the back cover is facing you. Find the second button on the left, just below the volume buttons, and press it down until the device powers off.
Step 2
Having a tough time with the blue plastic opening tools? Switch it up and give the black spudger a try instead. It might just make things a whole lot easier!
– Start at the top corner of your tablet and grab that trusty blue plastic opening tool. Glide it gently along the edge where the pieces meet. Take your time—slow and steady wins the race, and your device stays damage-free!
Tools Used
Step 3
– Gently separate the rear panel from the display screen like you’re peeling a banana—easy does it!
Step 4
– Grab that spudger tool and give the black button on the plug port a little friendly nudge—it’ll pop the battery right out of the plug like a pro!
Tools Used
Step 5
– Pop that battery out like a pro!
Step 6
– Grab your trusty tweezers and gently disconnect that black clip with a steady hand. You’ve got this!
Tools Used
Step 7
Use the magnetic pad to keep your screws from playing hide and seek while you work.
– Let’s get started by using the Phillips #000 Screwdriver to remove the 3mm Phillips head screws from the right and left corners of the speaker. This is a straightforward step, and you’ll be done in no time!
Tools Used
Step 8
– Alright, it’s time to bring your device back to life! Just reverse these steps, and you’ll be good to go.
– If you need help, you can always schedule a repair.
