Asus TUF Gaming FX705G Track Pad Replacement
Duration: 45 minutes
Steps: 8 Steps
Over time, track pads can get cranky from too much action or things like moisture, dust, and crumbs building up. If your Asus TUF Gaming FX705G track pad is sticking, lagging, or just plain ignoring you, it might be time for a swap. Before you dive into replacing it, take a quick look at your owner’s manual to rule out any minor glitches and to stay safe and smart while working on your device.
Step 1
– Unscrew the eleven Phillips #0 screws that are keeping the back cover in place. It’s like unlocking a treasure chest—you’re doing great!
Step 2
You’ll hear some satisfying pops as the back cover lets go.
– Grab your trusty opening tool and wiggle it along the edge of the back cover—it’s like unlocking a treasure chest! Once you’ve cracked that seam, slide the spudger in flat and give it a gentle nudge upward to pop it loose.
Tools Used
Step 3
– Unscrew those three Phillips #00 screws holding the battery housing in place. You’re almost there!
Step 4
– Gently unplug the wire from the motherboard—it’s like breaking up but on good terms. Then, smoothly lift the battery out of its cozy little spot. Take your time, no need to rush!
Step 5
– Gently slide that ribbon wire out of the track pad—it’s like freeing a tiny, delicate spaghetti noodle. You’ve got this!
Step 6
– Grab your Phillips #00 screwdriver and unscrew the two screws holding the track pad in place. It’s a quick job, just take your time and be gentle with those little screws!
Tools Used
Step 7
– Carefully grasp the ground wire ribbon and gently pry it away from the motherboard housing using your trusty tweezers.
Tools Used
Step 8
– To put your device back together, just follow these steps in reverse—easy peasy!
– If you need help, you can always schedule a repair.
