Asus Vivobook Flip 14 TP410U Motherboard Replacement
Duration: 45 minutes
Steps: 6 Steps
Ready to swap out the motherboard on your Asus Vivobook Flip 14 TP410U? This guide walks you through the steps with clear instructions and handy tips along the way. If things get tricky, you can always schedule a repair.
Step 1
– Unplug the power cord from your device and make sure it’s completely powered down before proceeding.
Step 2
– Grab your Phillips #00 screwdriver and remove all eleven 12.8 mm screws holding the bottom cover in place.
Tools Used
Step 3
Spin your laptop all the way around—yes, a full 360! This trick makes it way easier to pop off the back cover and keeps your components safe and sound.
– Slide your opening tool between the back cover and the keyboard—nice and easy.
– Gently pop each snap loose by working your way around, until the back cover and keyboard are free from each other.
Step 4
Handle the cables gently – too much force could cause some lasting damage.
– Unplug the cables connected to the HD audio, Wi-Fi card, and touchpad. Take it slow and steady, you’ve got this!
Step 5
Take it easy when unplugging those connectors – a little too much force could permanently damage the cable.
– Start by unscrewing and removing the ten 6.4 mm Phillips #00 screws highlighted in the photo. Next, carefully disconnect the connector that links the front display to the motherboard. If you need help along the way, you can always schedule a repair.
Step 6
Be gentle! Applying too much force could end up damaging other parts of your laptop. Take it slow and steady!
– Carefully slide the motherboard out, moving it away from the I/O ports on the side of your laptop. Take your time—no rush, just good vibes and steady hands!
Success!
