Asus ZenFone 5 Battery Replacement Guide: DIY Step-by-Step
Duration: 45 minutes
Steps: 5 Steps
If your Asus ZenFone 5 is struggling to hold a charge, it’s probably time to swap out that tired battery. Think of it as giving your phone a fresh start! Over time, batteries lose their mojo after too many charge cycles, leading to quicker drains. If your battery’s acting up, try calibrating it first to see if it’s just confused. Still not holding up? Time for a replacement. Before diving in, make sure your device is powered off—safety first! Use ESD-safe tools to avoid any accidental battery punctures, because nobody wants a fiery surprise. And if your battery’s looking a bit puffy, handle it with care. If you’re feeling unsure, you can always schedule a repair for some expert help.
Step 1
– Time to work some magic! Grab a SIM card removal tool or the trusty end of a paperclip, and gently insert it into the tiny hole on the left side of your phone. This will set the SIM card free!
– Now, give a little tug and pull out the SIM card tray. Look at you, making progress!
Step 2
The images show a metal spudger at work trying to lift the back cover. But hey, just a heads up—this isn’t the safest route, as it could poke a hole in the battery. Let’s keep things safe and sound!
To make removing the back cover a breeze, consider giving it a little warmth! You can use a heat gun or an iOpener to gently heat things up before you begin the cover removal. Trust us, it can really help you out!
– Slide a plastic opening pick into the gap between the back cover and the midframe. You’ll want to get a good grip on the pick, so you can wiggle it around with confidence.
– Keep working your way around the phone until the back cover is totally free. You’re doing great! Just a few more steps and you’ll be ready to rock and roll.
Step 3
– Grab your trusty Phillips #00 screwdriver and get ready for some fun! Start by removing the six screws located along the top mid frame. Once you’ve got those out, gently lift the top assembly piece. It should pop off effortlessly, and then you can set it aside like a pro!
Tools Used
Step 4
– Grab your trusty plastic opening tool and gently pop open that red square holding the bottom assembly piece snug against the frame. It’s like giving it a little nudge to say, ‘Hey, it’s time to come out!’
– Now, take your Phillips #00 screwdriver and let’s tackle those five screws keeping the bottom midframe in place. Just think of it as a mini treasure hunt!
– With those screws out of the way, carefully lift off the bottom midframe. It’s like peeling off a cozy blanket to reveal what’s underneath!
Tools Used
Step 5
– Now that you’ve done the hard work, it’s time to put everything back together—just retrace your steps in the opposite order and you’ll be golden!
– If you stumbled upon something tricky along the way and need a helping hand, feel free to schedule a repair.
– You’ve got this! Remember, reassembling can be a breeze when you take it step by step.
Tools Used
Success!
