Dell Streak 10 Pro Battery Replacement
Duration: 45 minutes
Steps: 4 Steps
Get ready to breathe new life into your Dell Streak 10 Pro Tablet by replacing a dead or faulty battery. This step-by-step guide from Salvation Repair will walk you through the process, and if you need help along the way, you can always schedule a repair.
Step 1
– Flip the device over so it’s lounging face-down on its screen.
– Grab those trusty plastic opening tools and gently pop open the top portion of the tablet—where the camera hangs out.
– Carefully lift that segment off and set it aside like the chill pro you are.
Step 2
– Unscrew the four 4mm Phillips #0 screws—easy peasy!
Step 3
– Grab that trusty plastic opening tool and gently pry off the entire back screen of the tablet. You’re doing great!
Step 4
Time to free that connector! Grab your tweezers and gently pull the white connector straight out of its socket. This little guy is holding the red, green, blue, and black cords, so handle it with care—no yanking, just a smooth, confident pull!
– You’re almost done. To put everything back together, just follow these steps in reverse.
– If you need help or want to make sure everything is done correctly, you can always schedule a repair
