DIY ASUS PadFone X Rear Camera Replacement Guide
Duration: 45 minutes
Steps: 6 Steps
Step 1
– Grab your trusty blue plastic opening tool and gently slide the tip into the gap between the back cover and the phone. Give it a little nudge upwards.
– Now, just keep moving around the edges of the phone until the entire back cover pops loose and is ready to be removed.
Step 2
– Take your trusty torx T5 screwdriver and remove those thirteen 3.6 mm screws like a pro! You’ve got this!
Step 3
– Grab your trusty blue plastic opening tool and gently slide the tip into the little gap between the mid-frame and the phone. Give it a little nudge upwards, just like you’re lifting a lid off a surprise box!
– Keep that golden momentum going as you glide around the phone, working your magic until the entire back cover feels free as a bird. Then, carefully lift off the mid-frame and voilà!
Step 4
Careful now! Using too much muscle can harm the connector.
– Grab your handy-dandy blue plastic opening tool and gently nudge the camera connector upward to free it from its cozy home on the motherboard.
Step 5
The camera is lightly attached to the motherboard with adhesive. A plastic opening tool can help gently loosen it up—just take it slow and steady! If you need help, you can always schedule a repair.
– With a steady hand and a bit of finesse, take those trusty tweezers and gently lift the rear camera out of your Padfone X. You’ve got this!
Tools Used
Step 6
– Now that you’ve rocked this repair, put your device back together by reversing the steps you just took!
– If you didn’t get through it, don’t sweat it! Just schedule a repair.
–
Success!
