DIY Asus ZenFone 5 Lite Vibration Motor Replacement Guide

Duration: 45 minutes
Steps: 7 Steps

Step 1

– Take a thin plastic tool and pop off the back cover of the phone. Once you’ve got it started, slide the tool around the phone’s edges to loosen the adhesive. With all sides freed, lift that back cover off.

Step 2

– Time to get a bit technical! Start by unscrewing the seven Phillips #0 screws found on the bottom of your phone. You got this!

Step 3

– Grab your trusty nylon spudger and gently wiggle it to pop off that lower cover. If you feel like you need a little extra help, the opening tool is your best buddy for lifting it off with ease.

Step 4

– Grab your trusty prying tool and give it a gentle nudge to lift off that sneaky connection hiding behind the black cover. You’ve got this!

Step 5

– Find that shiny gold-tipped black wire cozying up to the charging port circuit board. It’s your golden ticket!

– Slide your trusty plastic prying tool under the silver clasp and give it a gentle nudge to pop it off.

Step 6

– Grab your trusty plastic prying tool and gently slide it in on the left side of the charging port. Now, with a delicate touch, lift the charging port up and carefully detach it with your hand. Easy peasy!

Step 7

– Now it’s time to piece everything back together by simply retracing your steps. You’ve got this!

– If you decide to take a break from this guide, that’s totally fine.

– If you find yourself in a jam, don’t hesitate to schedule a repair!

Success!
Now you’re ready to put everything back together—just retrace your steps like a pro and enjoy the satisfaction of a job well done!
If you changed your mind and didn’t finish this guide, that’s totally okay!
If you find yourself in a bind and need extra help, you can always schedule a repair.

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.