DIY Guide: How to Replace Samsung Galaxy Tab 4 7.0 Camera
Duration: 45 minutes
Steps: 7 Steps
The front and rear cameras are cozy neighbors, sitting side by side, and they both need the same tools and steps to set them free!
Step 1
– Get started by inserting the pry tool between the chrome screen frame and the black phone housing at any corner – it’s time to get this repair underway!
– Now, carefully slide the pry tool around the tablet, applying a bit of force to gently pry the screen away from the phone housing. Remember, take your time and be patient – you’ve got this!
Step 2
– Gently wiggle and pop the back housing off the front panel like you’re opening a treasure chest—smooth and steady wins the race!
Step 3
Try not to flex the flat cables at the ends—they might get permanently warped.
– With your trusty bent tweezers, gently ease the flat cables away from their connectors. You’ve got this!
Tools Used
Step 4
– With a plastic opening tool in hand, carefully nudge those chip connections away from the motherboard. You’ve got this!
Step 5
– Grab your trusty Phillips 000 screwdriver and let’s tackle those last five 1.2 mm screws! You’ve got this!
Step 6
Handle the motherboard with care to keep it safe and sound!
– Rotate the motherboard away from the rest of the phone like in the first photo.
Step 7
Either camera on your tablet can get the same treatment – isn’t that handy?
– To put your device back together, simply follow these steps in reverse. Easy peasy!
– Cancel: I didn’t finish this guide.
– If you need help, you can always schedule a repair
Tools Used
Success!
