Home
Repair guides
Watch
Mobvoi
TicWatch
Watches

DIY Guide: How to Replace the Battery in Mobvoi TicWatch C2

Duration: 45 minutes

Steps: 6 Steps

A straightforward, fun guide to swapping out the battery in your TicWatch C2 on your own.

Step 1

– Grab a sharp and thin object to press and lift the plastic shell with the charging connectors. It’s glued on, so a little heat can help. Don’t remove it completely—just lift it because the connector is attached to the mainboard.

Step 2

– Gently pop off the plastic cover and unplug that charging connector from the mainboard like a pro.

Step 3

– Unplug those 4 connectors left to free the battery and mainboard block.

Step 4

– Alright, let’s gently separate the mainboard and battery block from the display front housing – easy does it!

Step 5

– Grab your trusty Philips screwdriver and unscrew the two screws holding the mainboard and battery in place inside the plastic shell. Take your time – they’re just waiting to be set free!

Step 6

– The battery is stuck to the mainboard with a bit of glue, but don’t worry, it’s a breeze to remove!

Success!

Ralph Harris

With over 20 years of experience in electronics repair and technical writing, this background reflects both expertise and dedication in the field. Credentials include a Bachelor’s degree in Computer Science from USM, more than 500 Apple repair certifications, and a Wise Level 2 Technician certification, spanning across the full spectrum of device and cell phone repair. More than 2000+ repair guides have been published on the company site, salvationrepair.com, with a focus on sustainability and reusability enabling even lay-men to repair devices that would have otherwise ended up at the county landfill.If you like this content and would like to see more like it - let us know! It only takes a second and getting to know our audience is the whole reason we do this. So don't be shy - shoot us a quick hi!