DIY Guide: Microsoft Lumia 640 LTE Screen Replacement Tutorial
Duration: 45 minutes
Steps: 8 Steps
Hey there! Get ready to unleash your inner gadget guru and give your Microsoft Lumia 640 LTE a screen that’s ready to rock and roll. This breezy guide will have you swapping out that old screen in no time, and before you know it, you’ll be showing off your shiny new screen to all your pals. If you need help, you can always schedule a repair.
Step 1
– Grab your trusty thumb or fingernail and gently pry the back cover off the phone. You got this!
Step 3
– Grab your trusty T4 Torx driver and get ready to unscrew! You’ll want to take out the screws in all four corners, plus the two nestled in the middle on the left side. That’s a total of six screws waiting for you to set them free!
Step 4
– Grab your trusty T4 Torx driver and carefully unscrew those two screws. You’ve got this!
– Make sure to keep these screws separate from the ones at the back of the phone. We want to ensure each screw finds its perfect home!
Step 5
– Grab your trusty plastic opening tool and gently pry the screen away from the back casing—no rush, take your time!
– Now, with a steady hand, use some tweezers to pop that clip on the side and carefully remove the back of the phone. You’ve got this!
Tools Used
Step 6
If you’re gearing up to swap out that motherboard, just breeze on over to Step 11 once you’ve wrapped up this part. You’ve got this!
– Gently coax that shiny gold tab upwards with your trusty tweezers or a spudger.
– With the same tools, carefully lift the white connector to fully separate the screen from the phone.
Tools Used
Step 7
This part is stuck on pretty good, so you might need to give it a little extra love to get it off.
– Grab your trusty plastic opening tool and gently slide it under that shiny gold strip.
– With your tweezers in hand, lift up the camera with care.
– Next up, use those tweezers to gently coax the depth sensor upwards.
Tools Used
Step 8
This part is stuck on with some serious glue. Don’t worry, we’ve got you covered!
– Ready to put your device back together? Just retrace your steps and follow these instructions in reverse. It’s like a fun puzzle!
– If you find yourself stuck or need a hand, you can always schedule a repair.
–
Success!
