Home
Repair guides
Phone
Lenovo
Lenovo Phone
Lenovo Vibe Z2 Pro

DIY Guide: Replace Lenovo Vibe Z2 Pro Backplate in 5 Steps

Duration: 45 minutes

Steps: 5 Steps

Dive into the world of your phone’s inner workings with this essential backplate disassembly guide. Let’s get that backplate off and discover the magic inside!

Step 1

Lenovo Vibe Z2 Pro Backplate Disassembly

– Unscrew the 4.9 mm torx head screws that are hanging out on the camera plate at the back of your phone. Let’s get this party started!

Step 2

– Unscrew those pesky 3.65 mm Torx head screws at the bottom of your phone and get ready for some repair fun!

Step 3

– Gently pop out the SIM card tray by using a pin to poke into the tiny hole on the side of your phone. It’s like giving your phone a little nudge to let it know you’re ready to get in there!

Step 4

– Gently slide that trusty Spudger into the little gap between your phone and the backplate. Just a little wiggle and you’ll be well on your way to popping them apart!

Step 5

– Let’s get this backplate off! Gently, gently, slide that backplate away from your phone. You got this!

Success!

Now that you’ve tackled the steps, it’s time to put everything back together—just like a puzzle but way cooler. If you find yourself lost along the way, don’t hesitate to schedule a repair. You’ve got this!

Ralph Harris

With over 20 years of experience in electronics repair and technical writing, this background reflects both expertise and dedication in the field. Credentials include a Bachelor’s degree in Computer Science from USM, more than 500 Apple repair certifications, and a Wise Level 2 Technician certification, spanning across the full spectrum of device and cell phone repair. More than 2000+ repair guides have been published on the company site, salvationrepair.com, with a focus on sustainability and reusability enabling even lay-men to repair devices that would have otherwise ended up at the county landfill.If you like this content and would like to see more like it - let us know! It only takes a second and getting to know our audience is the whole reason we do this. So don't be shy - shoot us a quick hi!