DIY Guide: Replace Samsung Galaxy Watch Screen – Step-by-Step
Duration: 45 minutes
Steps: 9 Steps
Use this guide to replace a cracked or broken screen on your Galaxy Watch.
Step 1
– Pop out those four Tri-point #00 screws (4.2 mm length) on the back of the watch like a pro!
Step 2
Hold off on removing the back cover just yet. There’s a flex cable tucked away, connecting to the core assembly inside.
– Grab your trusty opening tool and gently slide it between the back cover and the metal casing of your watch.
– With a little finesse, carefully pry that plastic back cover open like a pro.
Step 3
– Gently place the watch down and pop off the back cover to reveal the sensor connector on the motherboard. Time to get hands-on!
Step 4
– Time to get disconnected! Use a spudger to carefully release the sensor flex cable from the motherboard. Take your time, it’s an easy step!
Tools Used
Step 5
– Pop off the back cover—it’s like opening a treasure chest, but for tech!
– When sealing up your watch again, check that the rubber gasket is in perfect shape. If it’s looking tired, swap it out for a fresh one to keep things watertight.
Step 6
– Grab your trusty spudger and gently pry that display flex cable away from the motherboard. You’ve got this!
Tools Used
Step 7
Gently guide the display flex cable through the opening in the plastic frame—take it slow and steady, like threading a needle!
The plastic frame of the core is snugly nestled inside the housing—it’s holding on tight!
– Gently lift the core unit out of its cozy housing.
Step 8
– If you find it necessary, go ahead and stick some tape over the display to keep those pesky glass shards from becoming a hazard. Safety first, my friend!
Step 9
Warming up the display with a hair dryer or an iOpener makes it easier to peel away the adhesive.
– Time to put your device back together! Just retrace your steps and follow these instructions in reverse.
– Got some e-waste? Make sure to drop it off at an R2 or e-Stewards certified recycler.
– If things didn’t go as smoothly as you hoped, don’t sweat it! Give some basic troubleshooting a shot, or reach out to our Answers community for a helping hand.
– Changed your mind? No worries, just cancel this guide.
– Remember, you’re not alone in this journey!
Success!
