DIY Guide to Replace Huawei P9 Lite Back Cover
Duration: 15 min.
Steps: 2 Steps
In this guide, we’re diving into how to swap out your P9 lite’s worn-out back cover. Whether it’s got scratches, a bend, or you’re just in the mood for a fresh color, we’ve got you covered! If you need help, you can always schedule a repair.
Step 1
– First, grab that suction cup and place it a bit lower on the back cover. Give it a gentle pull to start lifting that cover off.
– Next, slide a pick between the display unit and the back cover and give it a little pry to separate them.
– Don’t forget to pop the back cover clips all around the device. If they’re being stubborn, feel free to use a second pick or give it a little extra tug with your fingers.
– Keep in mind, the back cover is stuck to the fingerprint sensor. A little warmth from a heat gun can help soften the glue and make things easier.
– Once all the clips are free, you can go ahead and remove the back cover. You’re doing great!
Step 2
– 1. Gently place the back cover onto the display unit and give it a little press all around to hear that satisfying snap as it locks into place.
