DIY Guide to Replace MacBook Pro 13 Unibody Lower Case

Duration: 45 minutes

Steps: 2 Steps

Hey there, superstar! Before you dive into this repair adventure, just a friendly reminder: always make sure your device is powered down and unplugged. Safety first, right? If you find yourself in a pickle and need a hand, feel free to schedule a repair. You’ve got this!

Swap out that aluminum bottom case on your MacBook Pro 13″ Unibody. It’s easier than you think and you’ll enjoy a great sense of accomplishment! But if you need help, you can always schedule a repair.

Step 1

– Alright, let’s tackle this! Remove these 10 screws that are holding the lower case of your MacBook Pro 13″ Unibody together. If you need help, you can always schedule a repair.

Step 2

– Gently lift the lower case and nudge it toward the back of your device to release the mounting tabs. A little wiggle goes a long way! If you need help, you can always schedule a repair

Salvation Repair

If you like this content and would like to see more like it - let us know! It only takes a second and getting to know our audience is the whole reason we do this. So don't be shy - shoot us a quick hi!